dsPIC30F4011

    Parameter Name
    Value
    Architecture
    16-bit
    CPU Speed (MIPS)
    30
    Memory Type
    Flash
    Program Memory (KB)
    48
    RAM Bytes
    2,048
    Temperature Range C
    -40 to 125
    Operating Voltage Range (V)
    2.5 to 5.5
    I/O Pins
    30
    Pin Count
    40
    System Management Features
    BOR
    POR
    Yes
    WDT
    Yes
    Internal Oscillator
    7.37 MHz, 512 kHz
    nanoWatt Features
    Fast Wake/Fast Control
    Digital Communication Peripherals
    2-UART
    1-SPI
    1-I2C
    Analog Peripherals
    1-A/D 9x10-bit @ 1000(ksps)
    USB (ch, speed, compliance)
    0, None,
    CAN (#, type)
    1 CAN
    Capture/Compare/PWM Peripherals
    4/4
    PWM Resolution bits
    16
    Motor Control PWM Channels
    6
    Quadrature Encoder Interface (QEI)
    1
    Timers
    5 x 16-bit 2 x 32-bit
    Parallel Port
    GPIO


    High-Performance Modified RISC CPU:

    • Modified Harvard architecture
    • C compiler optimized instruction set architecture
    • 84 base instructions with flexible addressing modes
    • 24-bit wide instructions, 16-bit wide data path
    • 16 x 16-bit working register array
    • Up to 30 MIPs operation:
      • DC to 40 MHz external clock input
      • 4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)
    • Peripheral and External interrupt sources
    • 8 user selectable priority levels for each interrupt
    • 4 processor exceptions and software traps
    • Primary and Alternate interrupt Vector Tables

    DSP Engine Features:

    • Modulo and Bit-Reversed Addressing modes
    • Two, 40-bit wide accumulators with optional saturation logic
    • 17-bit x 17-bit single cycle hardware fractional/ integer multiplier
    • Single cycle Multiply-Accumulate (MAC) operation
    • 40-stage Barrel Shifter
    • Dual data fetch

    Peripheral Features:

    • High current sink/source I/O pins: 25 mA/25 mA
    • Optionally pair up 16-bit timers into 32-bit timer modules
    • 3-wire SPI™ modules (supports 4 Frame modes)
    • I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
    • Addressable UART modules with FIFO buffers

    Motor Control PWM Module Features:

    • Complementary or Independent Output modes
    • Edge and Center Aligned modes
    • Multiple duty cycle generators
    • Dedicated time base with 4 modes
    • Programmable output polarity
    • Dead time control for Complementary mode
    • Manual output control
    • Trigger for synchronized A/D conversions

    Quadrature Encoder Interface Module Features:

    • Phase A, Phase B and Index Pulse input
    • 16-bit up/down position counter
    • Count direction status
    • Position Measurement (x2 and x4) mode
    • Programmable digital noise filters on inputs
    • Alternate 16-bit Timer/Counter mode
    • Interrupt on position counter rollover/underflow

    Analog Features:

    • 10-bit 1 Msps Analog-to-Digital Converter (A/D)
    • A/D Conversion available during Sleep and Idle
    • Sample/Hold Channels
    • Multiple Conversion Sequencing Options

    Special Microcontroller Features:

    • Enhanced Flash program memory:
      • 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)
    • Data EEPROM memory:
      • 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)
    • Self-reprogrammable under software control
    • Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
    • Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
    • vv
    • Fail-Safe clock monitor operation
    • Detects clock failure and switches to on-chip low power RC oscillator
    • Programmable code protection
    • In-Circuit Serial Programming™ (ICSP™)
    • Programmable Brown-out Detection and Reset generation
    • Selectable Power Management modes
      • Sleep, Idle and Alternate Clock modes

      CMOS Technology:

      • Low power, high speed Flash technology
      • Wide operating voltage range (2.5V to 5.5V)
      • Industrial and Extended temperature ranges
      • Low power consumption

Yorum Yap

Lütfen yorum yazmak için oturum açın ya da kayıt olun.

dsPIC30F4011

  • Marka: Microchip
  • Ürün Kodu: DSPIC30F4011
  • Stok Durumu: Stokta var
  • 30,06TL
  • Vergiler Hariç: 25,47TL
30 Watt Kalem Havya TS707 -21%
30 Watt kalem tipi elektronikçi havyası...
17,57TL 13,87TL
Vergiler Hariç: 11,76TL
40 Watt Kalem Havya TS707 -21% Tükendi
40 Watt kalem tipi elektronikçi havyası...
17,57TL 13,87TL
Vergiler Hariç: 11,76TL
40 Watt yanmaz uçlu kalem havya -17%
40 Watt yanmaz uçlu kalem havya.Uçtan somunlu...
21,27TL 17,66TL
Vergiler Hariç: 14,97TL
6 Volt 250 Rpm Redüktörlü Motor ve İnce Tekerlek -16%
6 Volt 250 Rpm Redüktörlü Motor ve İnce TekerlekBasit robot uygulamalarında kullanabileceğiniz ucuz ..
10,17TL 8,55TL
Vergiler Hariç: 7,25TL
6 Volt 250 Rpm Redüktörlü Motor ve Tekerlek -16%
Basit robot uygulamalarında kullanabileceğiniz ucuz maliyetli ve çok kullanışlı bir motor teker seti..
10,17TL 8,55TL
Vergiler Hariç: 7,25TL